Advertisement
GB
3 Operating
3.1
Usage
3.2
Operation
8
The use of the Shiatsu massage seat cover will improve your wellbeing after a
stressful day. The massage effect is particularly useful for treating tense muscles
and tired tissue. The unit provides pleasant relaxation for overcoming everyday
stress. The massaging can improve your well-being, and is also useful in the
sport and fitness areas.
Start-up
• Place the massage seat cover
this by means of the fasteners on the back.
• Insert plug
into the mains socket. Ensure that the power supply is easily
accessible.
• Take a seat on the Shiatsu massage seat cover and familiarise yourself with
the functions.
Operating the unit
The RBI Shiatsu massage seat cover has three functions for an effective
massage: fingertip massage, vibration massage and heat. The heat function
can only be used together with the shiatsu massage, during which the
vibration massage can also be activated. Do not use the unit for more than
15 minutes at a time. After approx. 15 minutes, the unit will switch off
automatically. Always allow the unit to cool down fully before you use it again.
Use the buttons on control pad
• Switch on the device by pressing O
illuminates.
"Upper Back" massage button
• When the
to the button illuminates and the Shiatsu massage heads
"Park" position at the base of the backrest, up to the shoulder area,
massaging the back in a circular motion whilst doing so. Once the uppermost
position has been reached, the direction of rotation of the massaging heads
is reversed. The heads then travel down to the centre of the back. Once the
heads reach this point, the direction of rotation is reversed again and then
travel up the back again. If you press button
function is switched off and the massage heads remain stationary in their
current position.
"Lower Back" massage button
• If you press the
the button illuminates. The Shiatsu massage heads
lower half of the back in a circular motion. The reversal of the direction of
rotation takes place when the respective end positions are reached. Pressing
button
during the massage, switches off this function and the massage
heads remain stationary in their current position.
"Full Back" massage button
• If you press the
similar to pressing buttons
• You can enhance the shiatsu massage at any time with a vibration massage
for your thighs by pressing the vibration massage button
• The vibration massage in the upper thigh area can also be operated separately
by pressing vibration massage button
lights up and both vibration massage motors
with a gentle massage. Press button
(medium intensity massage LED 2). Press button
on a high chair or armchair and attach it to
to operate the massage seat cover:
n/Off button
. The yellow power LED
is pressed, the green LED next
during the massage, this
, the green LED next to
travel up and down the
the function procedure is
and
, except that it is for the entire back.
. Level indicator LED 1 above the button
are switched on. They begin
again and the vibration level increases
move from the
.
a third time and the
Advertisement
