Advertisement
Available languages
Available languages
E70010600
Mod. SINTESI
Via Brigata Osoppo 166
33074 Fontanafredda fr. Vigonovo (PN), Italia
Tel. +39 0434567888
e-mail: info@emmeti.com - web site: www.emmeti.com
2
DIMENSIONS
130
28
3
CONNECTION DIAGRAM
L
L
L
L
N
N
N
N
NC
NC
NC
NC
C
C
C
C
NO
NO
NC
NO
NO
L
C
U
U
U
U
N
NO
Connection diagram
Connection diagram
for the supply of
for the control of the
circulation pumps,
boiler, heat pumps, etc.
solenoid valves,
etc. at 230V ~
4
DEVICE DESCRIPTION
a Clock
b Day of the week
c Off operation
d Active load (conditioning mode)
e Active load (heating mode)
f Measured temperature
g Running daily program divided into 24 histograms,
one for each hour of the day. Each hour is associated with one of the 3 temperatures:
1
Temperature T1
Temperature T2
Temperature T3
h Active timed operation
Synchronization with settings on the Cloud in progress
Connection to the active Wi-Fi network
Configuration menu:
RF (not used)
3
ADV advanced parameters of the device
TIMER timings
SET automatic operating temperatures T1, T2, T3
PROG automatic operating programs
CLOCK date and time
5
Local active operation. In this state the device is disconnected from the Cloud
1
and any change in operation must be made using the keys on the chronothermostat.
Local operation can be disabled by the app
Active keypad lock
2
click
1
User Manual
SINTESI WALL-MOUNTING WI-FI CHRONOTHERMOSTAT
WALL
Read all instructions carefully
Wi-Fi wall-mounting chronothermostat powered by mains (230 V~), suitable for the control
of heating and air-conditioning systems. The integrated Wi-Fi module allows the remote control
of the device via your smartphone or tablet. It's necessary to connect the device to the home
router and then install the appropriate app on your smartphone or tablet available free for iOS
and Android devices.
Code
Model
Description
02018146
SINTESI WALL
Cronotermostato settimanale Wi-Fi
SAFETY WARNINGS
During installation and operation of the device, it is necessary to comply with the following
instructions:
1)
The device must be installed by a skilled person, in strict compliance with the connection
diagrams.
2)
Do not power on or connect the device if any part of it is damaged.
3)
After installation, inaccessibility to the connection terminals without appropriate tools must be
guaranteed
4)
The device must be installed and activated in compliance with current electric systems
standards.
5)
Before accessing the connection terminals, verify that the leads are not live.
6)
In the electrical system of the building where the device must be installed, a protection device
from the overcurrents must be present.
7)
The device performs actions of 1B type and is suitable for environments with pollution degree
2 and overvoltage category III (EN 60730-1).
TECHNICAL CHARACTERISTICS
•
Power supply: 230V AC ± 10% 50/60 Hz
•
Output: bistable relay with changeover contact 5A / 250V AC
•
Weekly programming with 3 settable temperatures: T1, T2, T3
•
Daily resolution: 1h
•
Switch-on delay set between 15, 30 or 45 minutes (independent for each hour)
•
Measured temperature scale: 0°C ÷ + 50°C
•
Measured and displayed temperature resolution: 0.1°C
•
Temperature regulation range: 2.0°C ÷ + 50°C
•
Measurement update: every 20 seconds
•
Measurement accuracy: ± 0.5 ° C
•
Temperature regulation:
– on/off with adjustable differential between 0.1°C and 1°C
– proportional with settable band and regulation period
•
Operating mode: heating (winter) or conditioning (summer)
•
Display with blue backlighting
•
Automatic winter time/summer time
•
Keypad lock with password for installation in public places
•
Wall installation (or covering the box 503)
•
Terminal block for cables with section of 1.5 mm
2
•
Operating frequency band: 2.4 GHz IEEE 802.11 b/g/n
•
Maximum power of transmitted radiofrequency: 18.3 dBm
•
Operating temperature: 0°C ÷ +50°C
•
Operating humidity: 20% ÷ 90% non condensing
•
Storage temperature: -20°C ÷ +65°C
•
Degree of protection: IP: XXD
INSTALLATION AND INITIAL CONFIGURATION
The device can be installed on the wall or to cover the 3-module flush-mounting box (type 503).
We recommend positioning at a height of 1.5 meters from the floor, in an area that respects as
much as possible the average temperature conditions of the entire environment. Make sure that the
distance between the router and the device is such as to guarantee stable communication.
Avoid installation near doors or windows, in niches, behind doors and curtains or in positions with
1
excess or total lack of ventilation, to avoid that the reading of the temperature measured by the probe
is in some way offset.
1
1
2
2
3
3
2
3
4
4
5
1
1
4
5
1
1
1
2
click
5
1
1
2
click
2
6
INITIAL CONFIGURATION
1) Install and connect the device according to the connection diagrams shown in this manual
2) Install and start the Emmeti SINTESI WALL app on your smartphone (or tablet). Create a Emmeti account with which to associate the device SINTESI WALL
(If you already have a Emmeti account, go to step 3).
a. Choose "Register" and fill in the "e-mail" and "password" fields and confirm by choosing "Register".
For security reasons it is recommended to choose a password different from the one used to access your e-mail box
b. Check your e-mail box: confirm the activation of the account by clicking on the link contained in the e-mail sent by the system
3) Enter the e-mail address and password of your Emmeti account
4) Add SINTESI WALL to your Emmeti account
• On the app... Choose "New Thermostat" and follow the guided procedure.
• On SINTESI WALL.... . Hold down the keys
• On the app... Choose the wi-fi network highlighted in green with the name "iwm..." On the next screen select the home wi-fi network to connect SINTESI WALL.
Enter a name that identifies SINTESI WALL, the pin (4 digits shown on the display of SINTESI WALL). Confirm with "Save".
The configuration procedure is finished. At this point:
• the app displays the list of devices associated with your account among which also the newly associated device must appear.
• SINTESI WALL displays the main screen. Check that the icon
APP DESCRIPTION
Page "Devices list"
From this screen it's possible to choose which device to control.
SINTESI WALL devices are identified by a circular frame that stands
for the crown with the cursor in manual mode
allows you to record a new device
allows you to group multiple devices together.
Example 1: it is possible to group all the "SINTESI WALL" of a
3-floor building according to the logic: "Floor 1", "Floor 2" and "Floor 3"
Example 2: it is possible to group all the "SINTESI WALL" present
in the holiday home
Nuovo Termostato
"Program List" page
From the main page (Home) in AUTO mode, tap on the program in progress
to access the list of programs relating to the active operating mode. It's possible:
create a new program for the current season
Elenco Programmi
select, modify, delete or rename an existing program
Note: the padlock symbol to the left of the program name
indicates that that program cannot be edited or deleted
Display of temperature levels T1, T2, T3
By selecting a temperature level it is possible
to modify the value by sliding the cursor
Settings
From this screen you can:
SALVA
Change the name of the thermostat
Display the identification icon of the thermostat
Display the values of temperatures T1, T2 and T3
1
Make advanced settings as:
2
- configure the temperature alarm (maximum or minimum)
2
- enter the email of the recipient of the alarm
- choose the type of regulation (on-off or proportional)
3
Advanced settings
From this screen you can:
4
4
enter the email of the user who will receive the alarm signals
Impostazioni avanzate
SALVA
set the temperature thresholds and the time (delay) necessary
ALLARME
E-mail destinatario per le segnalazioni di
to trigger the alarm
5
allarme
1
1
paolo.rossi@purmo.com
choose the screen to choose the regulation type of temperature
Soglia di temperatura minima per allarme
5
°C
(on/off or proportional)
Soglia di temperatura massima per allarme
access the screen for blocking local operation.
Ritardo allarmi (secondi)
When local operation is locked, any setting made with
10
s
REGOLAZIONE TEMPERATURA
SINTESI WALL keypad will be ignored.
FUNZIONAMENTO LOCALE
2
This function is useful if you want to have control
click
of the device only using the app and prevent changes
in settings from the keypad of SINTESI WALL.
and
simultaneously until the display shows Conf nET
is fixed and that the time shown at the top left is correct.
Main Page
This screen shows the status of "SINTESI WALL":
Modify a program
Sabato
HOW TO DO IN CASE OF REPLACEMENT OF THE ROUTER
In case of replacement of the router of the home network, it is necessary
to connect the device to the new wi-fi network. Proceed as follows:
1. On the thermostat SINTESI WALL:
a. Hold down the keys
and
2. On the app:
b. Choose "Add Thermostat" ➔ WALL ➔ "Next"
c. Choose the Wi-Fi network highlighted in green with the name "iwm..."
d. In the next screen select the new Wi-Fi network and enter the password
e. Exit the app without entering the name and PIN serial number
HOW TO REMOVE THE DEVICE FROM YOUR ACCOUNT
Sometimes it may be necessary to delete a device from a personal account to move it to another
account, for example because the device is installed in a rented home and tenants change. Proceed
as follows:
1. On the app of the previous tenant:
a. Access the "Devices list" page
b. Hold the device to be deleted for a long time until the request to confirm deletion appears
c. After confirming the deletion, the icon
2. On the app of the new tenant:
- If you already have a personal Emmeti account:
d. Choose "Add Thermostat" ➔ WALL ➔ "Already configured"
e. Enter the name, the pin (to know how to view the PIN),
see ADV menu ➔ WI-FI connection configuration).
Choose "Save"
- If you do not have a personal Emmeti account yet:
d. Follow the "Device configuration" procedure described in this manual.
Setting the setpoint temperature in manual operation.
Slide the cursor to change the temperature.
Measured temperature (19.5°C)
Operating mode (HEATING)
System status:
( ) symbol present = on
Time remaining if the timer has been activated
Operating mode
Touch this area to change the operating mode
(heating/cooling) and mode (automatic/manual/off).
Activation of the timer
Setting the duration of the timing (timer).
It occurs after activating the timer.
To modify an existing program, select the
Mercoledì
SALVA
profile program of the day to be modified.
T1
T2
T3
00
On the screen that opens, assign at any time
01
of day one of the temperature among T1,
02
T2 and T3 (marked by light blue, green and
03
orange colours). Created a program for a day,
04
it's possible to copy it to any other day of the
05
06
week ("Copy" function).
07
Note: the image refers to the version of the
08
app for smartphone.
09
On the tablet the whole weekly programming
10
is visible on a single screen.
11
12
simultaneously until the display shows "CONF NET"
starts to flash
Advertisement
