DBL Technology GoIP-1 User Manual page 48

https://arttel.ru/
DBL Technology Co., Ltd.
www.dbltek.com
The parameters defined below are channel dependent. Please make sure that the desired channel
(
Parameter (SMS)
1. SMS Server
 SMS Server IP
 SMS Server Port
 SMS Client ID
 Password
2. SMS Number Plan
3. SMS Count Limit
4. Send Interval
5. Validity Period
6. Send SMSC Number
https://arttel.ru/shop/gsm-shlyuzy/gsm-shlyuz-goip-4
) is selected before making changes.
Description
SMS Server is a Linux based utility which is used to manage GoIPs registered
to send and receive SMS messages. In addition, it also keeps an activity
logs of each channel. Please visit our website for further information or
download the SMS Server Installation package.
Once the SMS Server is installed and in operation.
parameters are require to enable the GoIP to register to the SMS Server.
Please note that each channel must be programmed individually in order to
register to the SMS Server.
This specifies the domain name or ip address of the SMS server.
This specifies the communication port that is used by the SMS server.
This must match the port value set in the SMS server.
This specifies the login ID for the channel selected.
password must first be created in the SMS Server.
This specifies the login password for the SMS Client ID.
The function of this parameter is similar to the Dial Plan for calling. It is
used to modify the phone numbers of the SMS recipients. It has the same
syntax as the Dial Plan which is described in the Section 5.3.6 for more
information. When no rules are matched, SMS will be sent to the original
number received.
This sets the maximum number of outgoing SMS messages. When this
limit is reached, the channel is disabled for sending SMS.
corresponding icon in the Status Page to reset the SMS count to
zero.
This sets the interval in between two consecutive outgoing SMS messages.
This specifies the message expiration time in the Message Center. When
this period expires, the undelivered message is discarded.
Period (VP) is an integer from 0 to 255 and
VP Value Actual Time
0 - 143 (VP+1) x 5 minutes (i.e. 5 minutes intervals up to 12 hours)
144 - 167 12 hours + ((VP-143) x 30 minutes)
168 - 196 (VP - 166) x 1 day
197 - 255 (VP - 192) x 1 week
When this option is enabled, the SMSC Number stored on the SIM card is
read and sent to the Message Center when sending a message.
GoIP User Manual
Technical Support: support@dbltek.com
Default Value
The following
SMS Client ID and 44444
Click the
0
The Validity
48