Emerson Wireless 1410 Gateway Reference Manual page 44

Operation and Maintenance
September 2020
Table 5-4: Summary of Terms Used for EtherNet/IP Mapping Page
Terms
Last>>
Terms
Delete Selected
Select All
Select None
Select Errors
Submit
To add a new data point to the EtherNet/IP register map:
Procedure
1. Select New entry.
2. Complete all of the table entries for the new data point (note that the entry
3. Repeat for each new data point.
4. Select Submit.
5. When changes have been accepted, select Return to form.
44
Description
Navigates to the last page of this table
Description
Removes the selected entry from this table
Selects all table entries
Deselects all table entries
Selects all table entries that have an error message
Accepts all changes (highlighted in yellow)
columns may vary based on the EtherNet/IP communications settings).
See Table 5-1 for options of parameters that can be mapped.
Reference Manual
00809-0200-4410
(continued)
Emerson.com/Rosemount