Emerson Wireless 1410 Gateway Reference Manual page 15

Reference Manual
00809-0200-4410
Obtaining an IP address from a DHCP server is not recommended, since the Gateway
operation will be dependent on the availability of the DHCP server. For maximum Gateway
availability it is best practice to specify an IP address.
To change the TCP/IP Network Settings:
Procedure
1. Navigate to System Settings → Ethernet Communication.
2. Select Specify an IP address (recommended).
3. Enter the following:
4. Select Submit.
5. When prompted, select Restart Apps.
6. Select Yes to confirm restart.
7. Close the web browser.
2.3.4 System backup
The Gateway has a System Backup and Restore feature that saves all user-configured data.
It is best practice that a System Backup be performed periodically throughout the
installation and configuration process.
Procedure
1. Navigate to System Settings → Gateway → Backup and Restore → Save.
2. Select Save Configuration.
3. The Gateway collects the configuration date and when the file download pop up
4. Enter a save location and file name.
5. Select Save.
6. Select Return to form.
Emerson.com/Rosemount
• Hostname
• Domain Name
• IP Address
• Netmask
• Gateway
Note
Once the IP Address of the Gateway has been changed, communications to the web
interface will be lost. Restart the web browser, then log back into the Gateway using
the new IP address and other TCP/IP network settings. The PC/Laptop TCP/IP
network settings may need to be changed. During a Restart Apps the wireless
network will be temporarily lost.
appears, select Save.
Configuration
September 2020
15