Table of Contents
Advertisement
DOK-MOTOR*-1MB********-IT01-EN-P
Rexroth 1MB Kit Spindle Motor
5
Transport and Storage
5.1
Notes about Transport (Shipping) Instructions
5.2
Instructions on Machine Transport
The motor components (rotor and stator) must be transported in their original
package taking classes 2K2, 2B1, 2C2, 2S2, 2M1 specified acc. to
DIN EN 60721-3-2 into account.
Please observe the following classification limitations:
●
Transport temperature range -20 ... +80 ℃
●
Relative air humidity max. 75 % (at +30 °C)
●
No occurrence of salt mist
Before transport, discharge the liquid coolant from the stators to
avoid frost damage.
NOTICE
Installed components (e.g., KTY84, encoder) may contain
electrostatic sensitive devices (ESD).
Observe ESD safety measures.
WARNING
Only use hoisting gear suited for the weight of the motors.
Never walk under hanging loads.
Use suitable protective equipment and protective clothing
during transport, and wear safety shoes.
Do not lift or move the motor by the loom of cables.
Remove
commissioning and keep them
Bosch Rexroth AG
Transport and Storage
Never
touch
the
connection
electrostatic sensitive devices!
Risk of injury and material damage due to
improper handling during transport!
any
existing
transport
27/61
points
of
locks
prior
to
Advertisement
Table of Contents
