Advertisement
since one Internet Broadband Router functions both as a connection-sharing unit and as
a switch
Connect the router on a Wireless LAN environment
*Before you begin, insure that your have a stable internet connection
1. Plug in one end of the RJ45 network cable to the xDSL/Cable Modem.
2. Plug in the other end of the RJ45 network cable to the Wireless Internet Broadband
Router WAN port.
Check the installation
The control LEDs of the Wireless Internet Broadband Router are clearly visible and the status of
the network link can be seen instantly:
1. With the power source on, once the device is connected to the broadband modem, the
Power, CPU, LAN, WLAN and WAN port link LEDs of the Internet Broadband Router will
light up indicating a normal status.
2. While the WAN is link up to the ADSL/Cable modem, the WAN port's Link/ACT LED will
light up.
3. While the LAN is link up to the computer system, the LAN port's Link/ACT LED will light
up.
4. If you are having difficulties with the router. You may want to reset the router by pressing
the "reset" button the other back while the power is on. Hold the button for 30 seconds
Encore Electronics Inc 2005
Wireless Configuration
2
Advertisement
