Units Installation; Remove The Casing - Midea H2 Series Technical & Service Manual

Midea AC Fan Coil Unit
a (mm)
b (mm)
c (mm)
Uncased type

10.4 Units installation

Caution:
Installation must only be carried out by qualified technicians, trained to work with air-conditioning and refrigeration
systems. Incorrect installation could lead to unit malfunctioning and a consequent deterioration in performance.
For installation, follow the instructions set out below:
Check the space technically required for installation:

Space required for installation.

Space required for connecting the liquid lines and other valves.

Space required for connecting power supply.

Space required for connecting the unit to the external control panel (if any).

Space required for setting flow route and air inlet (for specific models).

Space required for correct and sufficient air flow.

Space required for removing condensate water.

Space required for cleaning the filter.

Space required for cleaning internal assembly and maintenance.

Remove the casing:

Removing screws *2,
①
≥150
≥90
≥50
*2 and *2 and then the casing as Figure 10.4.1.
② ③
a (mm)
b (mm)
c (mm)
≥150
≥90
≥50
45