Using The Firmware Selection Menu; Open Firmware Selection Menu; Firmware Selection Menu Options - Siemens SIMATIC IPC427E Operating Instructions Manual

Using the firmware selection menu

1.1

Open firmware selection menu

Procedure
1. Switch on the device or restart the device.
Note
The following message appears briefly after the device is switched on:
Press ESC for boot options
2. Immediately after switching on the device, press the <Esc> button and hold it down.
Result
The "Main Page" opens with the Firmware selection menu options (Page 8).
1.2

Firmware selection menu options

The number of available options in the firmware selection menu depends on your device
version.
The following options are available:
Option
Continue
Boot Manager
Device Management
Boot From File
Secure Boot
SCU
BIOS Update
8
Function
Exit firmware selection menu
Continue the boot procedure.
Specify the boot media from which to start, for example:
• Drive
• USB stick
Start device manager for UEFI boot media.
Boot from an *.EFI file.
Configure device startup in "Secure Boot Modus".
Start firmware configuration menu.
Perform BIOS update.
You can find more detailed information under "Update firmware (Page 36)".
Firmware/BIOS Description SIMATIC IPC427E, IPC477E
Operating Instructions, 07/2020, A5E50262994-AA
1