Siemens SIMATIC IPC427E Operating Instructions Manual page 33

Intel(R) AMT Configuration
MEBx setting
Manageability Feature Selection
SOL/Storage Redirection/KVM
(only if "Manageability Feature Selec-
tion" = Enabled)
User Consent
(only if "Manageability Feature Selec-
tion" = Enabled)
Password Policy
(only if "Manageability Feature Selec-
tion" = Enabled)
Network Setup
(only if "Manageability Feature Selec-
tion" = Enabled)
Activate Network Access
(only if "Manageability Feature Selec-
tion" = Enabled)
Unconfigure Network Access
(only if "Manageability Feature Selec-
tion" = Enabled)
Remote Setup And Configuration
(only if "Manageability Feature Selec-
tion" = Enabled)
Power Control
(only if "Manageability Feature Selec-
tion" = Enabled)
Firmware/BIOS Description SIMATIC IPC427E, IPC477E
Operating Instructions, 07/2020, A5E50262994-AA
Configuring Intel® Management Engine BIOS Extension (MEBx)
Meaning
Intel® AMT functions are enabled or disabled.
In the delivery state, "Manageability Feature Selection" = Disabled.
Enabling and disabling of the Intel® AMT functions:
• Username and Password
• SOL
• Storage Redirection
• KVM Feature Selection
User Consent settings.
Forces the following additional security behavior:
When a user attempts to establish a KVM connection remotely, a six-digit number is
displayed on the AMT PC. The remote user must enter this number on the help desk
PC before the KVM connection can be opened.
Password policy that specifies the conditions under which the password is permit-
ted to be changed remotely.
The following options can be selected:
• Default Password Only
• During Setup And Configuration
• Anytime
The following network settings can be configured:
Intel(R) ME Network Name Settings
• Host Name
• Domain Name
• Shared/Dedicated FQDN
• Dynamic DNS Update
TCP/IP Settings > Wired LAN IPV4 Configuration
• DHCP mode
Enables the network interface.
This MEBx setting is only available when the network is not enabled.
Disables the network interface and resets the network settings to their default
values.
Displays the current provisioning settings.
Specifies the power states (S0, S3, S4, S5) of the computer in which MEBx is ena-
bled.
3.2 Options of the MEBx
33