Programming Modes - RDS Technology Weighlog 200 User Manual

Programming Modes

There are 3 programming modes with various calibration factors and default
settings. Many of these settings are made on installation and do not normally
need to be changed unless the instrument is moved on to a different loader.
The operator does not normally need to access the programming modes.
CAL Mode 1 is for weight calibration. The instrument is calibrated
independently for each channel 1 to 5 (e.g. each channel can be dedicated
to suit a particular attachment or commodity). Channel 6 is used to
programme the Overload Alarm.
CAL Mode 2 covers Speed Compensation Factors, Static weight readout,
Manual weighing (using the REF button), Time, Date, and Units selection.
CAL Mode 3 is for Printer Setup.
NOTE: With careful operation, system accuracy can be as good as ±1%
capacity
Weighlog readings are not suitable as a legal basis for the sale of goods.
although ± 2% is more common in practice.
OVERVIEW
of lift
5