ATEN CS19208 Quick Start Manual
  1. Manuals
  2. Brands
  3. ATEN Manuals
  4. Switch
  5. CS19208
  6. Quick start manual
ATEN CS19208 Quick Start Manual

ATEN CS19208 Quick Start Manual

Hide thumbs Also See for CS19208:

Advertisement

Table of Contents

CS19208/CS19216
8/16-Port USB 3.0 4K DisplayPort
KVM Switch
Quick Start Guide
© Copyright 2020 ATEN
ATEN and the ATEN logo are trademarks of ATEN International Co., Ltd. All rights reserved. All
other trademarks are the property of their respective owners.
Part No. PAPE-1223-S50G
®
International Co., Ltd.
Printing Date: 06/2020

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CS19208 and is the answer not in the manual?

Questions and answers

Related Manuals for ATEN CS19208

Summary of Contents for ATEN CS19208

  • Page 1 Quick Start Guide © Copyright 2020 ATEN ® International Co., Ltd. ATEN and the ATEN logo are trademarks of ATEN International Co., Ltd. All rights reserved. All other trademarks are the property of their respective owners. Part No. PAPE-1223-S50G Printing Date: 06/2020...

  • Page 2: Package Contents

    AC power source, then plug the power table below. Follow the steps b 1. Press and hold down the [Nu pter cable into the switch’s Power Jack. Now the CS19208 / CS19216 is turned on. 2. Press and release the [-] key. er on the computers.
  • Page 3 Hardware Installation Rack Mounting - Front Single Stage Installation CS19216 (Front) CS19216 (Rear) HDMI and/or DisplayPort To prevent damage to your installation from power DisplayPort Cable surges or static electricity, it is important that all connected devices are properly grounded.

  • Page 4: Hardware Review

    CS19208 / CS19216 8/16-Port USB 3.0 4K DisplayPort KVM Switch Hardware Review Front View Rear View Port Selection Pushbuttons Grounding Terminal Port LEDs Power Jack Firmware Upgrade Recovery Switch Audio Jack Audio Jack Console Ports Section Firmware Upgrade Port KVM Ports Section USB 3.1 Gen1 Peripheral Hub Section...

  • Page 5: Single Stage Installation

    To install the switch, refer to the installation diagram and perform the following steps: Ground the CS19208 / CS19216 by connecting one end of a grounding wire to the Grounding Terminal and the other end to a suitable grounded object.

  • Page 6: Operation

    Section located on the unit’s front panel. Plug the power adapter that came with your switch into an AC power source, then plug the power adapter cable into the switch’s Power Jack. Now the CS19208 / CS19216 is turned on. Power on the computers.

  • Page 7: Hotkey Setting Mode (Hsm)

    Switches the KVM, Audio, and USB focus directly to the computer that corresponds [Port ID][Enter] to that Port ID (CS19208: 1 ~ 8 / CS19216: 1 ~ 16). Switches the KVM and Audio focus directly to the computer that corresponds to [Port ID][K][Enter] that Port ID (CS19208: 1 ~ 8 / CS19216: 1 ~ 16).

  • Page 8: Technical Support

    All information, documentation, fi rmware, software utilities, and specifi cations contained in this package are subject to change without prior notifi cation by the manufacturer. To reduce the environmental impact of our products, ATEN documentation and software can be found online at http://www.aten.com/download/ Technical Support www.aten.com/support...

This manual is also suitable for:

Cs19216

Table of Contents