Table of Contents
Advertisement
9.2 Audio setting
Some radio stations transmit their station signal in stereo
quality. This radio uses stereo signals by default and
playback is optimised for this.
For some stations with a weak signal, quality can be slightly
improved by playing them in mono quality. You can enable
this function in the menu, and the radio will automatically
switch to mono reception when signal quality is poor.
To change the audio setting, proceed as follows:
• Press [ ] and navigate to the menu item "Audio".
Confirm the selection by pressing [OK].
• Select "Mono only" and confirm the entry with [OK].
9.3 Automatic station search
• When you are in the playback screen, press [BACK] to
access the manual station settings.
• Press and hold [Volume -/+] until the automatic station
search begins.
• The radio stops the search and starts playback when
it finds a station.
• Press and hold [Volume -/+] to continue the search
until the next station is found.
• Confirm the selection by pressing [OK].
9.4 Manual station search
When you make station settings manually, you can define
the desired frequency yourself and tune into stations that
were ignored during automatic station search because
their signals were too weak.
• When you are in the playback screen, press [BACK] to
access the manual station settings
• Press [Volume -/+] ( - : -0.05 MHz / + : +0.05 MHz)
until the desired frequency is displayed. Wait a moment
until playback of the received station signal begins.
9.5 Presets
You can save up to 30 of your favourite stations for quick
and direct access.
9.5.1 Save presets
Set the station that you would like to save as a station preset.
If the station is received, proceed as follows:
• Press and hold [ ] until the Presets list opens.
• Navigate to the preferred memory slot and confirm your
selection by pressing [OK].
• The selection will be confirmed by the display showing
"Program (1-7) saved".
Note
It is not possible to delete a preset station. You can
only replace a preset station with another station and
overwrite the previous favourite.
9.5.2 Retrieving presets
Proceed as follows to open the overview with the station
presets:
• Press [ ] to call up the Presets list.
• Navigate to the preferred station and confirm your
selection by pressing [OK].
10. Auxiliary Input
Via the analogue audio input (AUX IN socket) you can
connect mobile devices (for example smartphone, tablet
PC, M3 player etc.) to the radio and play the audio files
using the radio's speakers.
• Press [M] repeatedly to activate Auxiliary Input (Aux In)
operating mode on the radio.
• Connect your mobile terminal device and the audio input
(AUX IN socket) on the radio using a 3.5 mm audio
cable.
• Start and control audio playback accordingly via the
connected device.
8
Advertisement
Table of Contents
