Access Favourites; Audio Setting; Auxiliary Input; Bluetooth - Hama DR1510 Operating Instructions Manual

7.4.2 Access favourites

Press [memory] to open the overview window with the list
of saved stations.
Use [enter/navigate] to select one of your favourites.
Note
Favourites cannot be deleted.
If all 30 station memory slots are fi lled and you wish to
save a new station, choose one of the occupied slots.
The station in this slot will be overwritten with the new
station.

7.5 Audio setting

For some stations with a weak signal, quality can be
slightly improved by playing them in mono quality. You can
enable this function (Forced mono) in the menu, and the
radio will automatically switch to mono reception when
signal quality is poor.
To change the audio setting, proceed as follows:
[memory]
[menu]
Audio setting
11

8. Auxiliary Input

Via the analogue audio input (AUX IN socket) you can
connect mobile devices (for example smartphone, tablet
PC, M3 player etc.) to the radio and play the audio files
using the radio´s speakers.
• After pressing [mode] repeatedly, activate operating
mode AUX:
• Connect your mobile terminal device to the audio in (the
AUX IN socket) of the radio using a 3.5-mm TRS stereo
cable.
• Start and control audio playback using the controls of the
connected terminal device.

9. Bluetooth

You can pair your terminal device with the radio using
Bluetooth and use it as a playback device. You can control
playback directly on the terminal device. You can adjust the
volume on the radio, as well.
Note – Bluetooth
• Check whether your mobile device (smartphone,
tablet PC. etc.) is Bluetooth capable.
• Note that the maximum range for Bluetooth is 10
metres without obstacles such as walls, people, etc.
• The Bluetooth connection may be disrupted by other
Bluetooth devices/ connections in the vicinity.
• It is only possible to connect the radio to one terminal
device.
• Note that compatibility depends on the supported
Bluetooth profiles as well as the Bluetooth versions
being used. (see Technical Data, operating
instructions of the terminal device in use)
After pressing [mode] repeatedly, activate operating mode
Bluetooth:
[mode]
[mode]