Table of Contents
Advertisement
8. FM
From the main menu or after pressing [ ] repeatedly,
activate operating mode FM (FM Radio) on the radio.
Stations that broadcast additional information regarding
the station and the programme, are highlighted on the
display with an RDS icon (Radio Data System).
This additional information is displayed by pressing
8.1 Scan setting
The search run setting allows you to determine whether
stations with low signal strength are ignored during the
automatic search run. Proceed as follows:
• Press [ ] (4) to access the Settings menu.
• Use [NAVIGATE/ENTER/VOLUME] (9) to navigate to
the "Scan setting" menu item.
• Confirm the selection by pressing [NAVIGATE/
ENTER/VOLUME].
• To have the search run stop only at stations with high
signal strength, select Strong stations only. Otherwise,
the search run will stop at every station for which
a signal is received.
Note
By default, the "Strong stations only" method is selected.
8.2 Search / Automatic search
• Press [NAVIGATE/ENTER/VOLUME] to start
a station search.
• The radio stops the search and starts playback when
it finds a station.
• Press [NAVIGATE/ENTER/VOLUME] again to continue
the search until the next station is found.
8.3 Presets
You can save up to 30 of your favourite stations for quick
and direct access.
8.3.1 Assigning the Presets shortcut buttons
• Set the station that you would like to save as a favourite
station preset.
• Once the station is playing, press and hold the relevant
shortcut button for around 3 seconds.
• The selection will be confirmed by the display
showing "Preset (1-4, depending on shortcut key)
stored".
• During playback, the Preset memory slot is displayed at
the right-hand edge of the screen.
Note
Favourites cannot be deleted. If all 30 station memory
slots are filled and you wish to save a new station,
choose one of the occupied slots. The station in this slot
will be overwritten with the new station.
8.3.2 Calling up shortcut button presets
[
].
To call up a preset station, press the corresponding
shortcut button (2-5).
8.3.3 Assigning the list of presets (1-30)
• Set the station that you would like to save as a favourite
station preset.
• If the station is playing, press and hold
approx. 3 seconds until the Presets list opens up.
• Navigate to the preferred memory slot and confirm your
selection by pressing [NAVIGATE/ENTER/VOLUME] (9).
• The selection will be confirmed by the display showing
"Preset (1-30, depending on storage space) stored".
8.3.4 Calling up a station from the Presets list (1-30)
• Press
[ ]
to call up the Presets list.
• Use [NAVIGATE/ENTER/VOLUME] (9) to navigate
to the preferred station and confirm your selection by
pressing [NAVIGATE/ENTER/VOLUME].
8.4 Audio setting
For some stations with a weak signal, quality can
be slightly improved by playing them in mono quality.
You can enable this function in the menu, and the
radio will automatically switch to mono reception when
signal quality is poor. To change the audio setting,
proceed as follows:
• Press [ ] (4) to access the Settings menu.
• Use [NAVIGATE/ENTER/VOLUME] (9) to navigate to
the "Audio setting" menu item.
• Confirm the selection by pressing [NAVIGATE/ENTER/
VOLUME] and choose your preferred setting.
8
[ ]
(3) for
Advertisement
Table of Contents
