Specifications - Omron H5CR Instructions Manual

H5CR
Accessories (Order Separately)
I
Hard cover
Soft cover
Track Mounting/Front Connecting Socket (for
#
H5CR-L only)
Back Connecting Socket (for H5CR-L
Finger Safe Terminal Cover for H5CR-B
Flush Mounting Adapter (see note 2)
Note: 1. Y92A-48G is a finger safe terminal cover which is attached to the P3G-08 Socket.
2. Supplied with each Unit.

Specifications

Model
Classification
Mounting
External connections
Enclosure ratings
Display modes
Output modes
Reset system
Input signals
Input method
Control outputs
Display
Digits
Max. time settings
Memory backup
Mounting method
Approved standards
2
Name
---
Finger safe type
#
only) ---
Finger safe type
# #
/-S
H5CR-L (Basic type)
Digital timer
Flush or Surface mounting
8P socket
IP40
Elapsed time (UP), remaining time (DOWN)
A, A-1, A-2, A-3, b, b-1, d, E, F
Power reset (except A-3, b-1, and F modes), External, manual, automatic resets (internal according to A-
1, b, b-1, d, and E mode operation)
Start, reset inputs
No-voltage input: Via opening and closing of contact
SPDT contact output and transistor output (NPN open collector)
LCD without backlight
4 digits
9.999 s (0.001 s units), 99.99 s (0.01 s units), 999.9 s (0.1 s unit), 9999 s (1 s unit), 99 min 59 s (1 s unit),
999.9 min (0.1 min unit), 9999 min (1 min unit), 99 hr 59 min (1 min unit), 999.9 hr (0.1 hr unit), 9999 hr (1
hr unit)
Backup time for power interruption: Approx. 10 years at 20
DIN track mounting, surface
mounting, and flush mounting
UL508, CSA C22.2 No. 14
Conforms to EN61010-1
Y92A-48
Y92A-48F1
P2CF-08
P2CF-08-E
P3G-08
P3G-08 with Y92A-48G (see note 1)
Y92A-48T
Y92F-30
H5CR-B (Standard type)
Flush mounting
Screw terminals (M3.5 screw)
IP54 (panel surface)
Start, reset, gate, key protect inputs
LCD with backlight
•
C
Flush mounting
H5CR
Model
H5CR-S (Short body type)