RX8804CE
9. External Dimensions / Marking Layout
9.1. RX8804CE
9.1.1. External Dimensions
• External dimensions
1.0 Max.
0.62
0.42
*1. The small metal pads on the short side of the ceramic package are used to test the crystal.
When assembling the part, please be careful not to connect or short circuit these pads.
In addition, please avoid short circuit between these metal parts by dew condensation or particle adhesion.
Figure 33 Package Dimension
9.1.2. Marking Layout
RX8804CE
Logo
#1 Pin Mark
Contents displayed indicate the general markings and display, but are not the standards for the fonts, sizes and positioning.
Figure 34 Marking
3.2 ± 0.2
2.5 ± 0.2
0.2 Min.
0.7
0.3
0.4
0.35
E8804 X
¥
0.9
*1
1.1
Type
123A
Page - 43
• Recommended soldering pattern
0. 7
0. 4
0.3
Frequency
XA : X
Stability
XB :
Y
Production lot
ETM59E-05