MSI NF720DT-C43 Series Manual page 45

pend/sleep mode, but f the button s pressed for more than four
seconds, the computer s turned off.
▶ Restore On AC Power Loss
Ths tem specfies whether your system wll reboot after a power falure or nterrupt
occurs. Settngs are:
[Off] Always leaves the computer n the power off state.
[On] Always leaves the computer n the power on state.
[Last State] Restores the system to the status before power falure or nterrupt
occurred.
▶ Wake Up Event Setup
Press <Enter> and the followng sub-menu appears.
▶ Resume From S3 By PS/2 Keyboard
Ths settng determnes whether the system wll be awakened from what power sav-
ng modes when nput sgnal of the PS/2 keyboard s detected.
▶ Resume From S3 By PS/2 Mouse
Ths settng determnes whether the system wll be awakened from what power sav-
ng modes when nput sgnal of the PS/2 mouse s detected.
▶ Resume By PCI Devce (PME#)
When set to [Enabled], the feature allows your system to be awakened from the
power savng modes through any event on PME (Power Management Event).
▶ Resume By PCI-E Devce
When set to [Enabled], the feature allows your system to be awakened from the
power savng modes through any event on PCIE devce.
▶ Resume by OnBaord Lan
When set to [Enabled], the feature allows your system to be awakened from the
power savng modes through any event on LAN devce.
▶ Resume By RTC Alarm
The field s used to enable or dsable the feature of bootng up the system on a
scheduled tme/date.
▶ Date / HH:MM:SS
These two fields can specfy the date/ tme for power-on by alarm.
MS-7511 MS-7511
3-13