Table of Contents
Advertisement
▍
▍
NVIDIA RAID
NVIDIA RAID
Completng the RAID BIOS Setup
1.
After assgnng your RAID array dsks, press F7. The Clear dsk data prompt ap-
pears.
2.
Press Y f you want to wpe out all the data from the RAID array, otherwse press
N. You must choose Yes f the drves were prevously used as RAID drves. The
Array Lst wndow appears, where you can revew the RAID arrays that you have
set up.
3.
Use the arrow keys to select the array that you want to set up, then press Enter. The
Array Detal wndow appears.
4.
If you want to mark ths dsk as empty and wpe out all ts contents then press C.
5.
At the prompt, press Y to wpe out all the data, otherwse press N.
6.
Press Enter agan to go back to the prevous wndow and then press Ctrl+X to ext
the RAID setup. Now that the RAID setup has been configured from the RAID BIOS,
the next step s to configure and load NVRAID drvers under Wndows, as explaned
n "Installng the NVIDIA MedaSheld Software Under Wndows" on p.B-8.
B-28
Advertisement
Table of Contents
