MSI NF720DT-C43 Series Manual page 43

▶ On-Chp SATA Controller
These tems allow users to enable or dsable the SATA controller.
▶ RAID Mode
Ths tem allows you to configure RAID mode for onboard SATA devces.
▶ I/O Devces
Press <Enter> to enter the sub-menu and the followng screen appears:
▶ COM Port 1
Select an address and correspondng nterrupt for the first seral port.
▶ Parallel Port
There s a bult-n parallel port on the on-board Super I/O chpset that provdes Stan-
dard, ECP, and EPP features. It has the followng optons:
[Dsabled]
[3BC] Lne Prnter port 0
[278] Lne Prnter port 2
[378] Lne Prnter port 1
▶ Parallel Port Mode
[Normal]
[EPP]
[ECP]
[ECP + EPP]
[B-Drectonal]
To operate the onboard parallel port as Standard Parallel Port only, choose [Nor-
mal]. To operate the onboard parallel port n the EPP mode smultaneously, choose
[EPP]. By choosng [ECP], the onboard parallel port wll operate n ECP mode only.
Choosng [ECP + EPP] wll allow the onboard parallel port to support both the ECP
and EPP modes smultaneously.
Standard Parallel Port
Enhanced Parallel Port
Extended Capablty Port
Extended Capablty Port + Enhanced Parallel Port
MS-7511 MS-7511
3-11