Getting Started - 3Com 3C16685 User Manual

Superstack ii dual speed hub management module
Table of Contents

Advertisement

92
C
4: U
HAPTER
Figure 18 Documentation Page
The fields are:
Help Specifies where the online help system can be found. Enter the
appropriate directory or Web address. Examples are:
file://f:/help/index.htm
http://yournetwork.com/help/index.htm
Documentation Specifies where the online documentation can be
found. Enter the appropriate directory or Web address. Examples are:
file://f:/documentation/index.htm
http://yournetwork.com/docs/index.htm
The locations specified for the help system and documentation must
both have index.htm on the end.

Getting Started

The Getting Started pages are a series of pages which set up basic
information for the stack. You are asked:
For a descriptive name for the stack.
If you want to allocate the stack IP information or leave the
allocation to a BOOTP server on your network (if you have one).
A BOOTP server automatically allocates IP addresses to all
equipment on your network.
If you chose to allocate the IP information, you are asked:
W
I
SING THE
EB
NTERFACE
For an IP address and subnet mask for the selected unit.
For an IP address for a default router — You may have a
default router which you want the unit to use to communicate
with other networks.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dual speed hub 500 mgmt moduleDual speed hub 500

Table of Contents