Adjustments Menu - Videx Kristallo Series Manual

Kristallo Series
Art. KRV86-KRV88
DURING THE CONVERASTION
During the conversation (Fig. 13):
• To switch from hands free to push to talk mode, keep
pressed the until the related LED starts to flash slow-
ly (Fig. 14). Keep pressed the
visitor (the LED flashes quickly) and release the button
(the LED flashes slowly) to listen the visitor;
• To open the door press the
• To enable the secondary service keep pressed the
button until the activation signals (call tone plus mes-
sage) are received (Fig. 16);
• To enable the BUS relay Art. 2305 (if connected on the
pass) keep pressed the button
shows the picture in Fig. 17 then select the BUS relay
to enable by the buttons
button.
• To enter into programming menu press the
(Fig. 18).

ADJUSTMENTS MENU

In the programming menu you can set:
• The speech volume (8 levels, Fig. 18);
• The picture brightness (8 levels, Fig. 19);
• The picture contrast (8 levels, Fig. 20);
• The picture hue (8 levels, Fig. 21);
Adjust the selected option using the buttons
then confirm by the button
the and buttons to navigate the options. With
"EXIT" selected, press
do adjust other settings.
Art. KRV88-KRV86 - Installation instructions
3.5" Hands free videomonitor for VX2300 digital system
button to talk to the
button (Fig. 15)
until the display
and and confirm with
button
and
to move to next option or use
to exit from the menu or
1 5 / 1 2 / 1 1 1 4 . 5 ° C
PTT
Fig. 13
1 5 / 1 2 / 1 1 1 4 . 5 ° C
PTT
Fig. 15
1 5 / 1 2 / 1 1 1 4 . 5 ° C
S E R V . - 1 + O K ?
PTT
Fig. 17
OSD
EXIT
Fig. 18
OSD
EXIT
Fig. 20
- 5 -
0 9 : 2 3
1 5 / 1 2 / 1 1 1 4 . 5 ° C
M E N U
PTT
Fig. 14
0 9 : 2 3
1 5 / 1 2 / 1 1 1 4 . 5 ° C
S R V
M E N U
PTT
Fig. 16
0 9 : 2 3
M E N U
OSD
EXIT
Fig. 19
OSD
EXIT
Fig. 21
66250903 - V4.2 - 15/03/21
0 9 : 2 3
0 9 : 2 3
M E N U