Videx Kristallo Series Manual page 3

Kristallo Series
Art. KRV86-KRV88
PROGRAMMING OSD MENU
When the system is in stand-by, keep pressed the button
until the monitor switches on showing the screen to the left.
The first programming option is the date & time (Fig. 4):
• change the values by the
• use buttons and
set (day, month, year, hours and minutes);
• confirm the setting by the
ton when the field minutes is selected. The system goes
to next programming step.
The second programming option is the privacy duration
(Fig. 5) (from 0 to 20 hours):
• adjust the value by the buttons
duration unlimited, the service is disabled by pressing
again the button );
• confirm the value by the
to next programming option.
Proceed in the same way for the other programming op-
tions: call tone volume (3 level, Fig. 6), melody (9 op-
tions, Fig. 7) and number of rings (for 1 to 9, Fig. 8).
Once selected "EXIT" press
return to edit programming options.
Note: from any of the two OSD menu's, if the video-
phone switches off because of the timeout, the con-
trols and the programmings are not stored.
VIDEOPHONE ADDRESS – SW1.1..7
The table below shows how to set the address of the videophone. Considering that ON = 1 and OFF = 0, multiply
each digit for the relevant decimal weight then sum values obtained to get the address: E.g. as highlighted in the
SW1.1..7 table OFF,ON,OFF,OFF,ON, OFF,ON in binary is equal to 0100101 then multiplying each digit for the relevant dec-
imal weight you obtain the address that is 37.
SWITCHES STATUS
7 6 5
OFF OFF OFF
OFF OFF OFF
OFF OFF OFF
OFF OFF OFF
OFF ON OFF
ON ON ON
Note: The maximum number of units allowed is 100 but the address of each unit can be a value between 1 and 127.
INTERCOMMUNICATION MODE – SW3.1
This switch establishes the intercommunication mode: in OFF position (default) intercommunication is between units
in the same apartment (same addresses but different extension); in ON position the intercommunication is between
SW3.1 units in different apartments (different addresses).
On installations where there are more than one intercom/videophone in the same apartment and intercommunication between dif-
ferent apartments is required, only one intercom/videophone may be set with this function (SW3.1=ON, SW3.2=OFF, SW3.3=OFF).
The other intercom/videophones in the apartment must be set for local intercommunication with extension addresses "2-4" (slaves).
From the intercom/videophone set for intercommunication with other apartments it will not be possible to intercommunicate with-
in the apartment but slave extensions 2-4 will be able to intercommunicate with each other within the apartment.
Art. KRV88-KRV86 - Installation instructions
3.5" Hands free videomonitor for VX2300 digital system
and buttons;
to move between the fields to
button or the
and (0 = privacy
or . The system jump
to exit or button
4 3 2
OFF OFF OFF ON
OFF OFF ON OFF
OFF OFF ON
OFF ON OFF OFF
OFF ON OFF
ON ON ON
but-
EXIT
1 5 / 1 2 / 1 1
Fig. 4
EXIT
to
Fig. 6
EXIT
R I N G S 6
Fig. 8
BINARY CODE - DECIMAL WEIGHT
1 64 32 16
0 0
0 0
ON 0 0
0 0
ON 0 1
ON 1 1
- 3 -
EXIT
0 9 : 2 3
EXIT
8 4 2
0 0 0 0
0 0 0 1
0 0 0 1
0 0 1 0
0 0 1 0
1 1 1 1
0 1 . 5 h
Fig. 5
M E L O D Y 1
Fig. 7
ADDRESS
1
1 1
0 2
1 3
0 4
1 37
1 127
66250903 - V4.2 - 15/03/21