Chapter 1. Removing The Rear Cover; Chapter 2. Removing The Top Cabinet - Sharp UP-600 Installation Manual

CHAPTER 1.
REMOVING THE REAR COVER
CAUTION: Before installation, be sure to turn off the power.
1. REMOVING THE REAR COVER
1) Remove the two screws
2) Remove the rear cover
2. REPLACING THE REAR COVER
Install the rear cover in the reverse order of disassembly.
.
.
1
1
CHAPTER 2.
REMOVING THE TOP CABINET
CAUTION: Before installation, be sure to turn off the power.
1. REMOVING THE TOP CABINET
<UP-600>
1) Open the printer cover .
2) Remove the ribbon cover
3) Lift the pop-up display unit
4) Remove the three screws
1
2
<UP-700>
1) Open the printer cover .
2) Lift the pop-up display unit
3) Remove the three screws
1
3
.
.
.
3
4
4
.
.
2
3