Instrument Set-up
Multifunctional endpiece
Adjusting measuring reference
Leica DISTO™ X3
Find Quality Products Online at:
The orientation of the endpiece
is automatically detected and
the zero point is adjusted accord-
ingly.
a) Distance is measured from the
rear of the device (standard setting).
b) Distance is measured from the
front of the device.
c) Distance is measured from the tri-
pod thread.
GlobalTestSupply
www.
When measuring with 90°
flipped-out endpiece please
meake sure that it lies plane
against the edge you measure
from.
d) Distance is measured from a Leica
DISTO Adapter FTA 360.
Confirm setting.
If device is switched off, ref-
erence goes back to standard
setting (rear of the device).
.com
sales@GlobalTestSupply.com
9