Operations; Switching On/Off; Clear; Message Codes - Leica DISTO D510 Manual

Operations

Switching ON/OFF

ON
Device is turned
OFF.

Multifunctional endpiece

Permament / Minimum-Maximum measuring

1 2
2 sec
Used to measure room diagonals (maximum val-
ues) or horizontal distance (minimum values)
Leica DISTO TM D510 792312
Find Quality Products Online at:
OFF
Press ON button
2 sec to start
continuous laser
mode. If no key is
pressed for 180
2 sec
sec, the device
switches off au-
tomatically.
min.
max.
GlobalTestSupply
www.

Clear

1x
Leave actual func-
Undo last action.
tion, go to default
operation mode.
The orientation
of the endpiece
is automatically
detected and
the zero point is
accordingly ad-
justed.
The minimum and maximum dis-
tance measured is displayed (min,
max.). The last value measured is
displayed in the main line.
8.532 m
.com

Message Codes

2x
If the info icon appears with a
number, observe the instructions in
section "Message Codes".
Example:
3
Stops permanent / minimum-
maximum measuring.
sales@GlobalTestSupply.com
EN
5