Domestic Hot Water - nilan CTS400 User And Installation Instructions Manual

Domestic hot water

8
1. Press "back" to return to the previous page.
2. If you scroll down with your finger, you can read off the current temperature of
the hot water.
3. You can set the domestic hot water by scrolling up or down with your finger on
the icon. It is indicated under the thermometer when the unit is producing
domestic hot water. The colour inside the thermometer changes in accordance
with the temperature. A temperature >40°C is red, 30-40°C is orange, and
<30°C is blue. Then you can see whether there is enough hot water for a bath.
4. Here you can see the current setting of the hot water temperature.
5. Press this icon to access more settings.
6. Press here to deactivate the production of hot water. You can reactivate the
hot water production by using your finger to scroll up the thermometer and
select the desired water temperature.
The settings icon (5) gives you access to settings related to supplementary electric
heating and anti-legionella measures.
1. Press "back" to return to the previous page.
2. Here you can choose at what temperature the supplementary electric heating
should be activated in order to help heat the domestic hot water.
3. Here you can deactivate the supplementary electric heating.
4. Here you can turn off the anti-legionella treatment. You can also set a particu-
lar day during the week for anti-legionella treatment.