Static Ip Mode - 3Com OfficeConnect 3C855 User Manual

Cable/dsl gateway

Hide thumbs Also See for OfficeConnect 3C855:

Table of Contents

4: R

HAPTER

UNNING THE

ETUP

IZARD

Figure 18 Clone MAC Address Screen

3 If your ISP requires an assigned MAC address, select the appropriate radio button

(Yes) and manually enter the values for a MAC address if required. (Figure 18) If

the computer you are using now is the one that was previously connected directly

to the cable or DSL modem, choose Clone.

Static IP Mode

To setup the Gateway for use with a static IP address connection, use the

following procedure:

1 Select the ISP has provided a static IP address radio button (See Figure 15) and

then click next.

Figure 19 Static IP Mode Screen

2 Enter your IP Address in the IP Address text box.

3 Enter your subnet mask address in the Subnet Mask text box.

4 Enter your ISP gateway address in the Internet (ISP) Gateway Address text box.

5 Enter your primary DNS address in the Primary DNS Address text box.

6 Enter your secondary DNS address in the Secondary DNS Address text box.

This step is optional. Not all ISPs require a secondary DNS address.

7 Check all of your settings, and then click Next.

Table of Contents