Table of Contents
Advertisement
MHUB-OS pages described
Configuration options for MHUB within MHUB-OS are detailed below.
Homepage / Dashboard
Account Management
MHUB Setup
Network Settings
uControl
Sequences & Scheduling
Voice Control
AV Settings
Control Drivers
The homepage for MHUB-OS. Control input switching, power and toggling ARC mode from this page.
Create a HDA Cloud account and register MHUB to extend warranty by 1 year. Registering MHUB on HDA Cloud
will allow MHUB to connect to other online services such as Amazon Alexa and will grant permissions to have
MHUB remotely managed by your installer (HDA Pro) if you have one. Having this account in place will also allow
HDANYWHERE to access technical data from your system to provide better support should you experience any
difficulties.
HDA Pro pairing:
If you are a professional installer and have an approved HDA Pro account then add your details to the HDA Pro
area in addition to the HDA Cloud account details to setup MHUB for remote management. Ensure that you
have permission from the MHUB owner and that their HDA Cloud account is in place otherwise pairing/remote
monitoring will not be possible.
This page describes basic configuration settings needed to operate MHUB on a daily basis. It contains a list
of MHUB-OS software, firmware and identifying information. From here it is possible to name source devices,
create and manage zones, manage output assignment, set time zone, set security PIN and apply a custom LCD
message (if applicable).
Manage the network settings for MHUB such as DHCP and WiFi settings.
Download or delete uControl Packs from HDA Cloud and assign them to input or display receiver IR ports to
enable remote control of sources, displays and AVRs. Set the operating mode for the HDMI IR Dongle and test
CEC commands to see if your display is supported.
A Sequence is a string of individual commands such as (switch to input 1, change channel to 101, mute output
A & D) which can be triggered by a single button press or Alexa voice command. Create and test Sequences
from this page. Additionally, it is possible to schedule a Sequence so that it executes automatically at a set time
or date.
Options to configure voice control for supported devices can be found here.
Manage EDID and video scaling from this page.
Links to HDANYWHERE Support (http://support.hdanywhere.com).
33
Advertisement
Table of Contents
