Subscribe to Our Youtube Channel
Related Manuals for HDanywhere MHUB 100A
Summary of Contents for HDanywhere MHUB 100A
- Page 1 MHUB (4x4) 100A MHUB (6x6) 100A CODE: MHUB44100A / MHUB66100A Product Guide (English UK) Revision 1: 27/04/2023...
- Page 2 Box. Fe...
- Page 3 eatures. Specs.
-
Page 4: Table Of Contents
Wiring diagram: MHUB with MZMA using TPC. uControl app interface 28-29 A remote control app for MHUB systems made by uControl HDANYWHERE and available from iOS & Android app Legals: Compliance, conformity & Product Guarantee 32-33 stores. Help is only an email away: support@hdanywhere.com. - Page 5 In the box Name: MHUB (4x4) 100A Name: MHUB (6x6) 100A Product code: MHUB44100A Product code: MHUB66100A MHUB (4x4) 100A Chassis/Hub MHUB (6x6) 100A Chassis/Hub Display receivers Display receivers Infrared Transmitter cable (1.5m) (IR TX) Infrared Transmitter cable (1.5m) (IR TX) Infrared (20-60Khz) Receiver cable (1.5m) (IR RX) Infrared (20-60Khz) Receiver cable (1.5m) (IR RX) Three Pin Phoenix Connector...
-
Page 6: Features, Specifications
Expanded IO capability (API pass through of IR and RS232 data) CEC source and display control with HDMI CEC volume pass through** Works with uControl Remote Remotely manageable 2 Year Warranty (+1 with HDA Cloud Registration) Help is only an email away: support@hdanywhere.com. - Page 7 Specification HDMI version HDMI 2.0b ±8kV (Air-gap discharge) ESD protection ±4kV (Contact discharge) HDCP compliance HDCP 2.3 & HDCP 1.4 MHUB66100A Video bandwidth 18Gbps 75W (Maximum) Power consumption MHUB44100A Video resolution Up to 4K@60Hz (4:4:4) with HDR 55.2W (Maximum) Colour space RGB, YCbCr 4:4:4, YUV 4:4:4, YCbCr 4:2:2/4:2:0 MHUB66100A 24V 3.75A...
- Page 8 IO. Contr...
- Page 9 rol. IR. Cabling.
-
Page 10: Mhub (6X6) 100A Front Panel Hdbaset
A. Power: Indicator light. If this light is on and solid then MHUB has power and is on. B. Source Selector: Tapping this button will cycle through HDMI inputs (1-6) sequentially for each corresponding output (A-F). C. Service Port: Service port for local updates and basic control of MHUB. Help is only an email away: support@hdanywhere.com. -
Page 11: Mhub (4X4) 100A Front Panel
MHUB (4x4) 100A front panel M HU B A. Power: Indicator light. If this light is on and solid then MHUB has power and is on. B. Source Selector: Tapping this button will cycle through HDMI inputs (1-6) sequentially for each corresponding output (A-F). C. -
Page 12: Mhub (6X6) 100A Rear Panel Ir Rx & Ir Tx
MHUB (6x6) 100A rear panel Source IR (OUT) All IR (IN) Hub IR (IN) AVR IR (OUT) Control (IP) RS232 DC 24V Display IR (IN) Source (IN) Audio (OUT) Video (OUT) Help is only an email away: support@hdanywhere.com. -
Page 13: Mhub (4X4) 100A Rear Panel
MHUB (4x4) 100A rear panel Video (OUT) All IR (IN) Hub IR (IN) Display IR (IN) Source IR (OUT) AVR IR (OUT) Source (IN) Audio (OUT) Control (IP) RS232 DC 24V... -
Page 14: Rear Panel Description (Both Models)
“System Settings” page on uOS. Once set, the configuration will apply to all Audio (OUT) ports. The 3.5mm ports are pre-out, meaning that volume can be controlled from uOS and fed to an external amplifier. These ports do not downmix. 11. Power: Connect the power supply to provide power to MHUB. Help is only an email away: support@hdanywhere.com. -
Page 15: Display Receiver Diagram & Description
MHUB display receiver diagram & description 1. Power LED: Indicator light. If this light is on and solid then the display receiver has power. 2. Firmware Update: Micro USB port for firmware updates via PC software. 3. RS232 (OUT): Will output a serial command sent to MHUB via API or control system command (IP >... -
Page 16: Ir (Infrared) Control
3. Connect an IR RX to port labelled “Display IR (IN)” on MHUB. Ensure that the Power Power port letter matches the port letter routed to the display receiver. Signal Signal 4. Place IR RX head in line-of-sight of the remote control. Help is only an email away: support@hdanywhere.com. -
Page 17: Using The Master & Room Remote, Testing That Ir Works
This will confirm that IR can pass from MHUB to your display successfully. Both remote controls are limited to video switching operations only. HDANYWHERE does not recommend that these remote controls are used as a primary controlling device for MHUB (see section: “MHUB control methods”). -
Page 18: Cabling
HDMI cabling but is not recommended, due to bandwidth requirements required by the system. HDANYWHERE recommends using suitably robust and good quality HDMI cables. It is not advised to use passive HDMI cables over 5 metres in length either on Note: the inputs or the outputs of MHUB or its display receivers. -
Page 19: Hiring A Hda Pro
All HDA Pros have the added ability to manage your system remotely for you - meaning that routine maintenance and even advanced troubleshooting can be done without the need to visit your home. Ask our HDA Pros for home control, cinema, heating/AC, lighting and security services. Download a guide to picking a HDA Pro here: https://content2.hdanywhere.com/en/downloads/documents/hdanywhere_doc-picking-an-installer.pdf Find a HDA Pro anywhere in the world today... -
Page 20: Control Methods
Control via a third-party control system is supported using our latest and most advanced API to date. For an up-to-date list of systems that MHUB supports please visit the “Control Drivers” section of our support site: http://support.hdanywhere.com. Control varies depending on the control system being used but typically, switching is supported with other drivers able to offer more. -
Page 21: Ucontrol Options (Remote, App, Watch, Voice)
Navigate endless entertainment and scene-setting options, with a unifying remote for all media, music and mood control from devices you already own. uControl is a smart home platform made by HDANYWHERE. Unintimidating, universal and unifying it is a single, consistent, easy-to-use interface that’ s always close to hand. - Page 23 Wiring diagram.
- Page 24 LINE-LEVEL OUTPUT VOLUME CONTROL Display Display Display Receiver Receiver Receiver Display Living Room Bedroom Kids room Receiver VIDEO + AUDIO ZONE VIDEO + AUDIO ZONE VIDEO ZONE VOLUME VOLUME CONTROL CONTROL Living Room Help is only an email away: support@hdanywhere.com.
-
Page 25: Wiring Diagram: Mhub With Mzma
Stacking with the Multi Zone Matrix Amplifier (MZMA) uControl ROUTER OR CONTROL SYSTEM MHUB (6X6) 100A Source IR (OUT) All IR (IN) Hub IR (IN) AVR IR (OUT) Control (IP) RS232 DC 24V Display IR (IN) Source (IN) Video (OUT) Audio (OUT) FIXED LINE-LEVEL OUTPUT... - Page 27 uControl.
-
Page 28: Ucontrol App Interface
Tapping acts as an Enter command. Additionally, if supported, then two fingers down will pause and two fingers up will resume. Drawing a chevron to the right will skip forward and a chevron to the left will take you back. Help is only an email away: support@hdanywhere.com. - Page 29 Audio selector icon. Tapping this icon will cycle through the different audio devices that are available in that zone. 1. Display audio (TV & speaker icon): Provides volume/mute control for the display. Pressing and holding the TV icon will reveal ARC options if supported and any audio inputs connected to the MHUB.
- Page 31 The Legal Bit.
-
Page 32: Legals: Compliance, Conformity & Product Guarantee
MHUB and this can be done via the hardware OS. Displays, soundbars and AVRs including the HDANYWHERE Privacy Policy. These terms, notices and policies are, connected to MHUB’ s outputs must be capable of decoding and/or playing Dolby collectively, the “Agreements”. - Page 33 (e) you alter or repair the Products without the written consent of HDA; 2. We, HDANYWHERE warrant to you, the end user of the HDA hardware (the “Products”) that on the date of (f) the defect arises as a result of an act of god, fair wear and tear, or your misuse, abuse, unreasonable use, wilful...
- Page 34 Registered in England & Wales 06046737 VAT 913222367 HDANYWHERE assumes no responsibility for any inaccuracies that may be contained in this document. In no event will HDANYWHERE be liable for direct, indirect, special, incidental, or consequential damages resulting from any...
Need help?
Do you have a question about the MHUB 100A and is the answer not in the manual?
Questions and answers