Figure 16. Removing screws and detaching connectors
2. Remove the function board
Figure 17. Removing the function board
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to "Completing the parts replacement" on page 55.
Replacing the touch board shield
Make sure the following FRUs (or CRUs) have been removed.
"Replacing the computer display panel" on page 25
To remove the touch board shield, do the following:
1. Remove 2 screws
1
3
.
and remove the touch board shield
2
.
.
Chapter 7
Installing or replacing hardware
31