Table of Contents
Advertisement
Network & internet
Set to enable/disable networks and set the
network connection settings.
From the Home screen, "Settings" →
a
"Network & internet"
Wi-Fi
Mobile data
Call
Tethering
Airplane
mode
Mobile
networks
VPN
Private DNS
172
Settings
(P172)
(P177)
(P111)
(P179)
Turn ON/OFF radio wave
emitting.
Set if enable data
communication and if enable
data roaming. Also set call
mode, preferred network type,
access point names, and
network operators.
(P183)
Set private DNS settings.
Wi-Fi
®
This terminal connects to the Internet via
access points for Wi-Fi
wireless LAN services. To connect, you must
configure the access point connection settings
on this terminal.
■ Reception interference caused by Bluetooth
devices
As wireless LAN (IEEE802.11 b/g/n) and
Bluetooth
®
device use the same frequency
(2.4 GHz), reception interference may occur
or the communications speed may lower
when using near Bluetooth
you may hear noise or have a connection
problem. In these cases, do the following:
• Keep the wireless LAN device over 10 m away
from the Bluetooth
®
• When using within 10 m, turn off the Bluetooth
device.
®
networks or public
®
device. Also,
device.
®
®
Advertisement
Table of Contents
