Reassigning The Function Buttons; Changing The Power Mode Setting (Select Products Only); Using Auto-Sleep Mode (Select Products Only) - HP QHD User Manual

Table 2-2 Button names and descriptions
Button
(1) Menu
(2) Brightness
Assignable function button
(3) Color
Assignable function button
(4) Next Input
Assignable function button

Reassigning the function buttons

Except for the Menu button, you can change the action associated with a function button from the default
action that you can quickly access your most commonly used menu items.
To reassign the function buttons:
1. Press the
2. Select Menu, select Assign Buttons, and then select one of the available options for the button that you
want to assign.

Changing the Power Mode setting (select products only)

This section describes how to activate Performance mode. Certain features on your monitor might require
Performance mode to be active.
When in sleep mode, to comply with international power standards, the monitor default setting is Power
Saver mode.
If your monitor supports Performance mode, then to keep the USB ports enabled when the monitor is in Auto-
Sleep Mode, change the Power Mode setting from Power Saver to Performance.
NOTE: If you are connecting a computer that is not battery powered, the Power Mode setting must be
changed to Performance mode.
To change the power mode setting:
1. Press the
2. Select Power, select Power Mode, and then select Performance.
3. Select Back and close the OSD.

Using Auto-Sleep Mode (select products only)

Your monitor has an energy-saving feature called Auto-Sleep Mode, a reduced power state. This section
describes how to activate or adjust Auto-Sleep Mode on your monitor.
When Auto-Sleep Mode is enabled (enabled by default), the monitor enters a reduced power state when the
computer signals low power mode (absence of either horizontal or vertical sync signal).
20 Chapter 2 Using the monitor
button
button
button
button
Menu button to open the OSD menu.
Menu button to open the OSD menu.
Description
Opens the OSD main menu, selects a menu item from the OSD, or closes the OSD
menu.
Adjusts the monitor screen brightness.
Opens the Color menu where you can adjust the screen color.
Switches the monitor's input source to the next active input.