Assigning The Function Buttons - HP OMEN 25 User Manual

Assigning the Function buttons

Pressing one of the three front Function buttons activates the buttons and displays the icons above the
buttons. The factory default button icons and functions are shown below.
Button
OK
Information
(Function button 1 -
assignable)
Viewing Mode
(Function button 2 -
assignable)
Next Active Input
(Function button 3 -
assignable)
You can change the Function buttons from their default values so that when the buttons are activated you can
quickly access commonly used menu items.
To assign the Function buttons:
1. Press one of the three Function buttons to activate the buttons, and then press the
the OSD.
2. In the OSD menu, select Menu Control, select Assign Buttons, and then select one of the available
options for the button you want to assign.
NOTE: You can reassign only the three Function buttons. You can not reassign the
button.
16 Chapter 2 Using the monitor
Function
Opens the OSD (on-screen display) menu.
Opens the Information menu.
Switches monitor to preset view modes.
Switches to the next video input source.
Menu button to open
Menu button or the power