Technical Data - SaMASZ KT 260 H Operation Manual

WARNING:
It is forbidden to use the mower for purposes other than those listed in this
instruction. Using the mower for other purposes will be classified as use not
according with the intended use and could exclude the manufacturer from
responsibility from any resulting damages. The mower should be used, serviced
and repaired only by persons familiar with its characteristics and with safety
regulations.
the manufacturer from responsibility for any resulting malfunctions or damages.

3.1. Technical data

1. The KT mowers can be generally divided into two groups:
•
mowers with hydro - pneumatic suspension
•
mowers with spring suspensions
2. The hydro – pneumatic suspension replaces the traditional springs which significantly
improves the comfort of mower operation. Thanks to this solution the operator can, using
the hydraulic system of the tractor quickly set the pressure of the cutting bar on the ground.
Additionally this system is integrated with the hydraulic safety device.
3. The technical specifications of the groups mentioned above are presented below.
Table 2. Technical data – Mowers with hydro – pneumatic suspension
Mower type:
Mowing width
Number of blades [pcs]
Tractor PTO speed
Tractor power
Tractor class
Working capacity
Transport height
Transport width
Operating width
Weight
Articulated telescopic shaft
with unidirectional clutch
Line cutting speed
Disc rotational speed
Mower type:
Mowing width
Number of blades [pcs]
Tractor PTO speed
Tractor power
Tractor class
Working capacity
Transport height
Operating width
Weight
S – Mower with crop scarifier
Operating manual
Unauthorized modification
KT 260 H
2.60 m
12 (2 x 6)
50 kW
(70 KM)
od 2.0
~ 2.8 ha/h
3100
2.0 m
4.7 m
900 kg
KT 260 S H KT 300 S H
2.60 m 3.00 m
12 (2 x 6) 14 (2 x 7)
58 kW 66 kW
(80 KM) (90 KM)
2.0 2.0
~ 2.8 ha/h ~ 3.5 ha/h
2.0 m 2.0 m
4.7 m 5.1 m
1080 kg 1180 kg
Rear disc mowers with central suspension
- with hydro-pneumatic or spring suspension
of the
KT 300 H
3.00 m
14 (2 x 7)
1000 rpm
58 kW
(80 KM)
od 2.0
~ 3.5 ha/h
3500
2.0 m
5.1 m
1000 kg
540 Nm
86.2 m/s
3078 rpm
KT 340 S H KT 260 W H
3.40 m
16 (2 x 8)
1000 rpm
75 kW
(100 KM)
2
~ 4.0 ha/h
2.0 m
5.5 m
1290 kg
- 4 -
mower may release
KT 340 H
3.40 m
16 (2 x 8)
65 kW
(90 KM)
od 2.0
~ 4.0 ha/h
3900
2.0 m
5.5 m
1080 kg
KT 300 W H
2.60 m 3.00 m
12 (2 x 6) 14 (2 x 7)
58 kW 66 kW
(80 KM) (90 KM)
2.0 2.0
~ 2.8 ha/h ~ 3.5 ha/h
2.0 m 2.0 m
4.7 m 5.1 m
1160 kg 1260 kg
W – Mower with crop rollers