Device Identification; Introduction - SaMASZ KT 260 H Operation Manual

1. DEVICE IDENTIFICATION

The mower identification plate is affixed permanently to the body of the mower shown on Pict.1
Pict. 1. Location of the identification plate.
The identification plate contains:
full name of the manufacturer,
−
− mower serial number,
− mower model,
− date of manufacture,
− weight
ATTENTION:
Detailed information about the mower can be obtained from the manufacturer or
distributor of the machine.

2. INTRODUCTION

•
This instruction should be regarded as part of the basic equipment of the mower. When
the mower is turned over to a different user it should be in working condition and accompanied
by this instruction manual and all other basic equipment it should posses.
•
Before operating this mower the user should first completely read the instructions in this
manual and should be familiar with general safety rules.
•
The mower has been manufactured in accordance with all safety norms.
•
Adhering to the instruction manual guarantees the user full safety during operation.
•
In the event of any doubts regarding starting and operation of the mower please contact
the manufacturer.
•
The instruction manual is an integral part of the equipment of the mower.
During the operation of the mower please observe all the warnings and
safety rules which are marked with this sign in the instruction manual.
WARNING:
It is forbidden to operate the mower without previously reading the instruction
manual, and for it to be used by persons not authorized to drive farm tractors,
especially children .
Operating manual
GENERAL WARNING
Rear disc mowers with central suspension
- with hydro-pneumatic or spring suspension
KOSIARKA DYSKOWA
KT 300 H
Pict. 2. Identification plate.
quality control mark,
−
− the CE symbol signifies that the mower
conforms to the 2006/42/WE Directive
and harmonized standards.
− the MADE IN POLAND sign
- 2 -