Revision History - Espressif Systems ESP32-PICO-V3-ZERO User Manual

Revision History

Revision History
Date Version
2020-04-08 V1.0
1. Applicable FCC rules
This module is granted by Single Modular Approval. It complies to the
requirements of FCC part 15C, section 15.247 rules.
2. The specific operational use conditions
This module can be used in IoT devices. The input voltage to the module is
nominally 3.0V-3.6 V DC. The operational ambient temperature of the module is
–40 °C ~ 85 °C. Only the embedded PCB antenna is allowed. Any other
external antenna is prohibited.
3. Limited module procedures
N/A
4. Trace antenna design
N/A
5. RF exposure considerations
The equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator and your body. If the equipment
built into a host as a portable usage, the additional RF exposure evaluation may
be required as specified by 2.1093.
Espressif Systems
Release notes
First release.
OEM Guidance