Huawei SUN2000 M0 Series User Manual page 99

SUN2000-(3KTL-10KTL)-M0
User Manual
Figure C-1 Setting export limitation parameters
Table C-1 Control mode
Parameter
Unlimited N/A
Grid Closed-loop
connected controller
with zero
power
Limitation mode
Power lowering
adjustment
period
Issue 06 (2020-10-23)
-
● SDongle/
SmartLogger
● Inverter
● Total power
● Single-phase power
-
Copyright © Huawei Technologies Co., Ltd.
C Setting Export Limitation Parameters
Description
If this parameter is set to Unlimited,
the inverter output power is not
limited. The inverter can export its
rated power to the power grid.
● Set this parameter to SDongle/
SmartLogger when the
SmartLogger1000A is connected.
● If multiple inverters are cascaded,
set this parameter to SDongle/
SmartLogger.
● If there is only one inverter, set
this parameter to Inverter.
● If this parameter is set to Total
power, it indicates that no
backfeeding occurs for the three
phases.
● If this parameter is set to Single-
phase power, it indicates that no
backfeeding occurs for the phase
with the maximum power.
Specifies the shortest interval for a
single anti-backfeeding adjustment.
92