Huawei SUN2000 M0 Series User Manual page 48

SUN2000-(3KTL-10KTL)-M0
User Manual
Terminal Description
Figure 5-11 Terminals
(1) DC input terminals
Figure 5-12 Correct wiring terminals
Procedure
Step 1 Connect the DC input power cable.
Before inserting the positive and negative connectors into the positive and
negative DC input terminals of the SUN2000, check that the DC SWITCH is OFF.
Use the Amphenol Helios H4 PV connectors supplied with the SUN2000. If the PV
connectors are lost or damaged, purchase the connectors of the same model. The
device damage caused by incompatible PV connectors is not covered under any
warranty.
Issue 06 (2020-10-23)
WARNING
CA UTION
Copyright © Huawei Technologies Co., Ltd.
(2) Battery terminals
5 Electrical Connections
41