Huawei SUN2000 M0 Series User Manual page 4

SUN2000-(3KTL-10KTL)-M0
User Manual
Symbol
Change History
Changes between document issues are cumulative. The latest document issue
contains all updates made in previous issues.
Issue 06 (2020-10-23)
Updated
Updated
Issue 05 (2019-11-12)
●
●
●
Issue 04 (2019-10-18)
●
●
●
●
●
●
●
Issue 06 (2020-10-23)
Description
Indicates a potentially hazardous situation which, if not
avoided, could result in equipment damage, data loss,
performance deterioration, or unanticipated results.
NOTICE is used to address practices not related to personal
injury.
Supplements the important information in the main text.
NOTE is used to address information not related to personal
injury, equipment damage, and environment deterioration.
A Grid Codes.
10 FAQ.
Updated the appearance and installation diagrams because the structure of
the mounting bracket at the lower part of the inverter rear panel is changed.
Updated the screenshots of the FusionSolar app.
Updated E AFCI.
Updated 5.1 Preparing for Installation
Dongle to the WLAN-FE Smart Dongle.
Updated 5.5 (Optional) Installing the Smart Dongle
installation method of the WLAN-FE Smart Dongle.
Updated 5.6 (Optional) Installing the Signal
supports the cascading of multiple inverters.
Updated 5.6.2 Connecting the RS485 Communications Cable (Smart Power
Sensor) and added the three-phase three-wire wiring diagram.
Updated 6.2 Powering On the System
the WLAN-FE Smart Dongle and 4G Smart Dongle.
Updated 6.3 Commissioning, modified the scenario names, FusionSolar app
download methods, and app screenshots, and added version description about
FusionSolar app supported by the WLAN-FE Smart Dongle.
Updated C Setting Export Limitation Parameters
screenshots and parameter description.
Copyright © Huawei Technologies Co., Ltd.
About This Document
and changed the WLAN Smart
and added the
Cable. The Dongle signal cable
and added indicator description about
and modified the
iii