Huawei SUN2000 M0 Series User Manual page 103

SUN2000-(3KTL-10KTL)-M0
User Manual
Parameter
Communication
disconnection
fail-safe
Communication
disconnection
detection time
Active power
output limit for
fail-safe
----End
Scenario 2: SmartLogger1000A Networking Scenario
See the
You can scan the QR code to obtain it.
Issue 06 (2020-10-23)
● Disable
● Enable
-
-
SmartLogger1000A User Manual
Copyright © Huawei Technologies Co., Ltd.
C Setting Export Limitation Parameters
Description
In the inverter anti-backfeeding
scenario, if this parameter is set to
Enable, the inverter will derate
according to the active power
derating percentage when the
communication between the inverter
and the Dongle is disconnected for a
period longer than Communication
disconnection detection time.
Specifies the time for determining
the communication disconnection
between the solar inverter and the
Dongle.
Specifies the derating value of the
inverter active power by percentage.
If the Dongle does not detect any
meter data or the communication
between the Dongle and the inverter
is disconnected, the Dongle delivers
the derating value of the inverter
active power by percentage.
.
96