Advertisement
Quick Links
L1110
Start Here
IMPORTANT: Before using this product, make sure you read
these instructions and the safety instructions in the online
User's Guide.
1
Unpack
Note:
Do not open the ink bottles until you are ready to fill the ink
tanks. The ink bottles are vacuum packed to maintain reliability.
Remove all protective materials from the product.
Note:
Do not turn on the product yet.
2
Fill ink tanks
Warning:
Keep the ink bottles out of the reach of children and do not
drink the ink.
Caution:
• This product requires careful handling of ink. If ink spills, wipe it off
immediately with a damp towel to avoid permanent stains. If ink
gets on your clothes or belongings, it may not come off.
• Epson cannot guarantee the quality or reliability of non-genuine ink.
The use of non-genuine ink may cause damage that is not covered
by Epson's warranty.
Note:
Use the ink bottles included with the printer to set up the
product. Part of the ink will be used to charge the print head. These
bottles may print fewer pages compared with subsequent ink bottles.
1
Open the ink tank cover and the cap for the black ink
tank.
Note:
Refer to the color-coded sticker on the ink tank unit to
identify the color of each tank.
2
Unpack the black (BK) ink bottle. Hold the ink bottle
upright and slowly turn the bottle cap to remove it.
Caution:
Do not shake or squeeze the ink bottles. Do not touch
the top of the ink bottle after its cap is removed.
3
Place the top of the ink bottle on the filling port, then
slowly stand the bottle upright to insert it, as shown.
Note:
Do not force the bottles into position; they are keyed for
each color.
4
Wait for the ink to fill the tank. Do not squeeze the bottle.
Note:
Ink flows into the tank and stops automatically when the
ink tank is filled to the upper line. If ink does not flow from the
bottle, lift and reinsert the bottle.
Advertisement
Related Manuals for Epson L Series
Summary of Contents for Epson L Series
- Page 1 If ink gets on your clothes or belongings, it may not come off. • Epson cannot guarantee the quality or reliability of non-genuine ink. Note: Ink flows into the tank and stops automatically when the The use of non-genuine ink may cause damage that is not covered ink tank is filled to the upper line.
- Page 2 When the ink tank is full, remove the ink bottle and Press the power button to turn on the product, then securely close it with the bottle cap. wait for the power light to stop flashing. The power light and the ink light stay on.
- Page 3 CD (Windows only) or download and Slide the edge guides all the way out. run your product’s software package. For the latest software, visit www.epson.com.jm/support/L1110. Follow the instructions on the computer screen to run the setup program.
- Page 4 Part number Black Cyan Magenta EPSON is a registered trademark and EPSON Exceed Your Vision is a registered logomark of Seiko Epson Corporation. Yellow Designed for Excellence is a trademark of Epson America, Inc. Mac is a trademark of Apple Inc., registered in the U.S. and other countries.