Advertisement
5
When the ink tank is full, remove the ink bottle and
securely close it with the bottle cap.
Note:
Do not leave the ink bottle inserted; otherwise the bottle
may be damaged or ink may leak. If any ink remains in the bottle,
store the bottle upright for later use.
6
Close the black ink tank cap.
7
Repeat the previous steps for the other colors.
8
Close the ink tank cover.
3
Turn on and charge the ink
1
Connect the power cord to the back of the product and to
an electrical outlet.
Caution:
Do not connect to your computer yet.
2
Press the
power button to turn on the product, then
wait for the
power light to stop flashing. The
light and the
ink light stay on.
3
stop button for 5 seconds until the
Press and hold the
power light starts to flash and ink charging begins.
Note:
Ink charging takes about 10 minutes. When the
light stops flashing, ink charging is complete.
Caution:
Do not turn off the product, open the front cover, or
load paper while the product is charging or you'll waste ink.
4
Load paper
See the online User's Guide for information about loading
capacity and available paper types and sizes.
1
Make sure the product is not charging ink. Then raise the
paper support and tilt it backwards slightly.
power
power
Advertisement
