Advertisement
2
Slide the edge guides all the way out.
3
Load A4- or letter-size paper, glossy or printable side up
and short edge first, in the middle of the paper support.
4
Slide the edge guides against the paper, but not too
tightly.
5
Pull out the output tray, then raise the paper stopper.
For instructions on loading envelopes or legal-size paper, see
the online User's Guide.
5
Install software
Note:
If you are using a Mac or your computer does not have a
CD/DVD drive, an Internet connection is required to obtain the product
software.
1
Make sure the product is NOT CONNECTED to your
computer.
Windows
:
If you see a Found New Hardware screen, click
®
Cancel and disconnect the USB cable.
2
nsert the product CD (Windows only) or download and
I
run your product's software package. For the latest
software, visit www.epson.com.jm/support/L1110.
3
Follow the instructions on the computer screen to run the
setup program.
Any problems?
There are lines or incorrect colors in my printouts.
Run a nozzle check to see if there are any clogged nozzles.
Then clean the print head, if necessary. See the online User's
Guide for more information.
Setup is unable to find my product after connecting it
with a USB cable.
Make sure your product is on and securely connected as
shown:
Error indicators
If you see one of the error indicators below, follow the steps
here to proceed:
Flashing
On
Initial ink charging may not be complete. Be sure to
complete the steps in the "Fill ink tanks" and "Turn on
and charge the ink" sections.
Paper is out or multiple pages have fed into the paper
support. Load paper correctly in the paper support,
then press the
Paper is jammed. Remove any jammed paper from
inside the product or from the paper support. Make sure
your paper is loaded correctly, then press
the
button.
Printer error. Open the front cover and remove any
paper from inside the product. Then turn the power off
and on again.
button.
Advertisement
