Menu Settings; Menu System - Kenwood KDC-6080R/RV Instruction Manual

Menu settings

SCAN RDM REP
LOUD
#1 - 4
KDC-6080R/KDC-6080RV
Menu display
KDC-5080R
Menu display
NEWS indicator
4
¢ 38
FM
PWR
OFF
PTY
DISC
DAB
EJECT
D.SCN M.RDM MENU
TI DISP
VOL ADJ NAME.S
AUD
DISC
MENU DISP AM
AUTO indicator
™ indicator
NEWS indicator
™ indicator
AUTO indicator

Menu System

You can set the defaults for additional functions in the menu
mode.
Make a setting for each function, referring to the following
operations.
1
Enter the menu mode
Hold down the MENU button for one second or more.
"MENU" is displayed when the menu mode is entered.
The function that you can adjust is indicated with the current
settings displayed.
2
Selecting function to set
Press the FM button to search through the functions until you
see the one you want to adjust in the display.
Press the AM button to search through the functions
backward.
Example: If you want to switch the setting of the touch sensor
tone function from on to off, first search through the
functions until you see "Beep/BEEP ON" in the
display.
3
Changing setting for currently displayed function
Press either the 4 or ¢ button.
The setting will change for each function.
Example: The setting of the touch sensor tone will switch from
on to off, and "Beep/BEEP OFF" is displayed.
4
Ending the menu mode
Press the MENU button.
NOTE
Make sure to end the menu mode when finished.
If you fail to end the menu mode, several functions may not
operate properly, including the Traffic Information function and
the Alarm function.
— 24 —