Presetting Volume For Traffic Information/News; Radio Text Scroll - Kenwood KDC-6080R/RV Instruction Manual

Cd receiver
Table of Contents

Advertisement

Presetting Volume for Traffic Information/News

Preset the volume level to be used for traffic information and
news broadcasts.
1
Tune into the station for which you want to set the volume.
2
Adjust the volume to the desired level.
3
Hold down the TI VOL ADJ button for two seconds or more.
The volume level blinks once in the display to indicate that the
data has been stored.
Future traffic information/news broadcasts are heard at the
preset level.
NOTE
• The volume cannot be lowered by this function during tuner
reception. The volume is only set when it is louder than the
listening volume of the tuner.
• You can arrange only to listen to traffic information or news
bulletins with at preset volume with the volume set at
minimum.

Radio Text Scroll

This function permits the text to be scrolled and the entire text
to be displayed. The scrolling method differs depending on the
setting of scrolling in the menu.
To scroll manually:
1
Press the DISP button to display the Radio Text.
2
Holding down the DISP button for one second or more results
in one scrolling display of the text.
To scroll automatically:
1
Press the DISP button to display the Radio Text.
The text will be displayed in one scrolling display.
2
Holding down the DISP button for one second or more results
in one scrolling display of the text.
NOTE
Please see the menu settings (page32) about switching between
manual scrolling and automatic scrolling.
— 15 —

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kdc-5080rKdc-6080rKdc-6080rv

Table of Contents