NEC MultiSync LCD195NX User Manual page 8

2. OSD structure
Main Menu
(Icon Select, Analog Input)
Press
"SELECT"
key
AUDIO
Control the sound volume of speakers and headphone.
To mute the speaker sound, press the 1<->2/RESET key.
BRIGHTNESS
Adjusts the overall image and background screen brightness.
CONTRAST
Adjusts the image brightness in relation to the background.
AUTO CONTRAST (Analog Input only)
Adjusts the image displayed for non-standard video inputs.
AUTO ADJUST (Analog Input only)
Automatically adjusts the Image Position, the H. Size and
Fine setting.
LEFT/RIGHT (Analog Input only)
Controls Horizontal Image Position within the display area of
the LCD.
DOWN/UP (Analog Input only)
Controls Vertical Image Position within the display area of the
LCD.
H. SIZE (Analog Input only)
Adjusts the horizontal size by increasing or decreasing this
setting.
FINE (Analog Input only)
Improves focus, clarity and image stability by increasing or
decreasing this setting.
COLOUR CONTROL SYSTEMS
Five colour presets (9300/7500/sRGB/USER/NATIVE) select
the desired colour setting.
The sRGB and NATIVE, colour presets are standard and
cannot be changed.
COLOUR RED
Increase or decreases Red. The change will appear on
screen.
COLOUR GREEN
Increase or decreases Green. The change will appear on
screen.
COLOUR BLUE
Increase or decreases Blue. The change will appear on
screen.
TOOL
Selecting TOOL allows you to get into the sub menu.
FACTORY PRESET
Selecting Factory Preset allows you to reset all OSD control
settings back to the factory settings. The RESET button will
need to be held down for several seconds to tage effect.
Individual settings can be reset by highlighting the control to
be reset and pressing the RESET button.
01_English
Main Menu (Adjust)
Press
"SELECT"
key
Press "SELECT" key
Adjust by using
"–" or "+"
English-4
4
Example Tool:
Press "SELECT" key
Press "SELECT" key
Press
"–" or "+"
Sub Menu
(Icon Select)
Sub Menu (Adjust)
EXIT
Selecting EXIT allows you exit OSD menu/ sub menu.
LANGUAGE
OSD control menus are available in nine languages.
OSD TURN OFF
The OSD control menu will stay on as long as it is in use. In
the OSD Turn OFF submenu, you can select how
long the monitor waits after the last touch of a button to shut
off the OSD control menu. The preset choices are
10 - 120 seconds by 5 seconds step.
OSD LOCK OUT
This control completely locks out access to all OSD control
functions without Brightness and Contrast. When attempting
to activate OSD controls while in the Lock Out mode, a
screen will appear indicating the OSD are
locked out. To activate the OSD Lock Out function, press "1<-
>2/ RESET", then "+" key and hold down simultaneously. To
de-activate the OSD Lock Out, press "1<->2/ RESET", then
"+" key and hold down simultaneously.
RESOLUTION NOTIFIER
If ON is selected, a message will appear on the screen after
30 seconds, notifying you that the resolution is not at optimal
resolution.
DDC/CI
Turns ON or OFF the two way communication and control of
the monitor.
MONITOR INFO
Indicates the model and serial numbers of your monitor.
OSD Warning
OSD Warning menus disappear with SELECT button.
NO SIGNAL: This function gives a warning when there is no
signal present. After power is turned on or when there is a
change of input signal or video is inactive, the No Signal
window will appear.
RESOLUTION NOTIFIER: This function gives a warning of
use with optimized resolution. After power is turned on or
when there is a change of input signal or the video signal
doesn't have proper resolution, the
Resolution Notifier window will open. This function can be
disabled in the TOOL menu.
OUT OF RANGE: This function gives a recommendation of
the optimized resolution and refresh rate. After the power is
turned on or there is a change of input signal or the video
signal doesn't have proper timing, the Out Of Range menu
will appear.
1/10/07, 8:38 AM
Press
"–" or "+"
Press "SELECT" key
Adjust by using
"–" or "+"