Bernina Q Series User Manual page 39

> Insert the thread first in the eyelet positioned vertically above the spool and then in the front left eyelet of
the thread guide.
> First, guide the thread on the left-hand side of the machine through the upper right thread guide, then
pull in the direction of the arrow through the lower thread guide.
> Hold the thread above the lower thread guide with your left hand, and guide it with your right hand
through the slot above the service door to the right-hand side of the machine.
> IMPORTANT: Check whether the presser foot has been raised and consequently whether the thread
tension discs have been opened.
Setting up the machine
39