Rack-Mounting The Chassis In A Nebs-Compliant Mode - Cisco Catalyst 9400 Series Hardware Installation Manual

Installing the Switch
Table 7: 23 Inch Rack Mount Kit Part Numbers
Switch Model
Catalyst 9404R Switch
Catalyst 9407R Switch
Catalyst 9410R Switch
Table 8: 23 Inch Rack Mount Kit Contents
Quantity
2
6
6

Rack-Mounting the Chassis in a NEBS-Compliant Mode

Warning To prevent bodily injury when mounting or servicing this unit in a rack, you must take special precautions to
ensure that the system remains stable. The following guidelines are provided to ensure your safety:
• This unit should be mounted at the bottom of the rack if it is the only unit in the rack.
• When mounting this unit in a partially filled rack, load the rack from the bottom to the top with the
• If the rack is provided with stabilizing devices, install the stabilizers before mounting or servicing the
Statement 1006
Warning Take care when connecting units to the supply circuit so that wiring is not overloaded. Statement 1018
Warning To prevent the system from overheating, do not operate it in an area that exceeds the maximum recommended
ambient temperature of:
40°C. Statement 1047
Before you begin
Prepare for the installation as follows:
heaviest component at the bottom of the rack.
unit in the rack.
Rack-Mounting the Chassis in a NEBS-Compliant Mode
23-Inch Rack Mount Kit Part Number
C9404-FB-23-KIT=
C9407-FB-23-KIT=
C9410-FB-23-KIT=
Parts Description
Rack Mounts
M4 Phillips pan-head screws
12-24 x 3/4-inch Phillips binder-head screws
Cisco Catalyst 9400 Series Switches Hardware Installation Guide
71