Cisco Catalyst 9400 Series Hardware Installation Manual page 110

Installing an AC-Input Power Supply Module
Step 6
Verify that you have the correct AC power cord for your location and power supply rating and only then plug
the power cord connector into the power supply AC-in receptacle.
1
Step 7
Strap in the power cord retainer, to hold it in place and avoid accidental removal.
See Power Cord Retainer Mechanism, on page 105
Cisco Catalyst 9400 Series Switches Hardware Installation Guide
104
Power cord, plugged into the AC-in
receptacle
Removing and Replacing FRUs
- -